TRW Brake pad set Front MCB829SRT Sintered

Full description

The MCB829SRT sintered brake pads from TRW are widely sold brake pads for the front of the motorcycle. TRW / Lucas is a major player in the motorcycle brake parts market. TRW has a total of more than 200 branches spread over 25 countries with a total of approximately 63,000 employees. Except for the TRW Racing brake pads, all brake pads are TÜV approved. This means that these products meet strict safety requirements and are therefore very reliable. Brake pads are wear-sensitive parts and when they are worn out this will create dangerous situations on the road. Brake pads without lining will have a lot less braking power, making the braking distance a lot longer. Therefore, regularly check the thickness of the lining. When this is 3 millimeters, you need to replace the brake pads, the extreme you can go to is a thickness of 2 millimeters. In addition to checking the brake pads, it is wise to also regularly check the brake fluid level. A shortage of brake fluid can cause moisture or air to enter the brake line, which can drastically reduce braking power or even cause it to disappear completely. Not only brake fluid and brake pads must be checked regularly, but also other maintenance-sensitive parts! When you decide to buy the MCB829SRT Sintered brake pads from TRW for the front, you have a top product with high braking power that reacts immediately. Only a small amount of manual force is required to be able to brake properly and it is also easy to dose. When purchasing the MCB829SRT Sintered brake pads from TRW, you do not have to observe a special running-in phase and you will benefit from tuned friction values ​​from front to rear axle.