TRW Brake pad set Front MCB658SV Sintered

Full description

The MCB658SV sintered brake pads from TRW are widely sold brake pads for the front of the motorcycle. TRW / Lucas is a major player in the motorcycle brake parts market. TRW has a total of more than 200 branches spread over 25 countries with a total of approximately 63,000 employees. Except for the TRW Racing brake pads, all brake pads are TÜV approved. This means that these products meet strict safety requirements and are therefore very reliable. Brake pads are wear-prone parts and when they are worn out this will create dangerous situations on the road. Brake pads without lining will have a lot less braking power, making the braking distance a lot longer. Therefore, regularly check the thickness of the lining. When this is 3 millimeters, you need to replace the brake pads, the extreme you can go to is a thickness of 2 millimeters. In addition to checking the brake pads, it is wise to also check the brake fluid level regularly. A shortage of brake fluid can cause moisture or air to get into the brake line, which drastically reduces braking power or even stops it altogether. Not only brake fluid and brake pads must be checked regularly, but also other maintenance-sensitive parts! When you decide to buy the MCB658SV Sintered brake pads from TRW for the front, you have a top product with high braking power that react immediately. Only little manual force is required to be able to brake properly and it is also easy to dose. When purchasing the MCB658SV Sintered brake pads from TRW, you do not have to observe a special running-in phase and you will benefit from tuned friction values ​​from front to rear axle.